Why is Rockspace Extender Not Showing Up on Network List?
After you install the Rockpace WiFi range extender in your home, you can connect to its network using the WiFi or through an Ethernet connection. When connecting to its WiFi, you connect the device to the extender’s SSID or the network name. In case the Rockspace extender not showing up on network list, then you will face issues connecting to its WiFi network. If the WiFi connection is bothering you and you are looking for the best solution for this, then know that you have reached the right page. In this post, we have penned down various basic and advanced troubleshooting tips that can help in resolving the network issue.
Rockspace Extender Not Showing Up on Network List: Fixed
When you see that the SSID of the extender is not shown in the list of available networks, know that one of the following reasons is responsible for this:
- The extender is not turned on
- Connecting device is not in range
- Firmware is outdated
- The network adapter is disabled
- The extender not getting internet signals from the main gateway
Before delving into deep troubleshooting, try your hands on some quick fixes first:
Extender SSID Not Showing Up: Quick Fixes
Check Power Supply
The extender should be fully booted up first so that you can connect to its WiFi. In case the electricity supply is not adequate, you will face issues connecting to its network. Verify the same and make the necessary amendments and then try connecting to its WiFi.
Check the Connections
If the Rockspace extender not showing up on network list then you should check the connections between the devices. The Rockspace extender receives its signals from the router. So it should be securely connected to the host router. Replace the cable if it is damaged and ensure see to it that the correct ports are used.
Access Network Within the Extender Range
There are chances that the device on which you are trying to access the extender’s WiFi is not placed within the extender’s network range. Bring the device within the network and then see if you see Rockspace_ext in the network list.
Advanced Tips to Fix the Connectivity Issue
Power Cycle Whole Network
At times the extender does not work properly due to simple technical problems. Power cycle the whole network and try to connect to its WiFi. No idea how to power cycle a network? Try this:
- Turn off the Rockspace extender using its Power button.
- Unplug the power cable also.
- Power off the host router and remove its power cable.
- Remove the Ethernet connection between the two devices.
- The devices should stay idle for some time. You can take as much time as possible.
- After that, make an Ethernet connection between the two devices.
- Thereafter, connect the router’s power cable and switch it on first.
- Next turn on the extender.
See if the extender’s network name is now available in the list of networks.
Change Adapter Settings
We recommend you try any other device to connect to the extender’s WiFi. In case other devices can connect or there is no other device that you can use to check the WiFi connection, then access the Network Settings of your computer or laptop (if you are facing issue with it) and enable the Network Adapter.
On a Windows PC, go to Search > Control Panel > Network and Sharing Center > Change Adapter Settings > Right-click and Enable WiFi Adapter.
When you ignore the firmware updates for a long time then older firmware can affect the functioning of the extender. Looks like you have committed the same mistake of not getting the firmware updated on your Rockspace wireless range extender. Log in to your extender via re.rockspace.local and get the firmware updated right away. But to log in you must be connected to the extender’s network right? Make a LAN connection between the computer and extender and then log in. Right after updating the firmware to the most recent version, we are sure you will no longer be facing the WiFi connectivity issue with your extender.
In the End
The aforementioned basic and advanced troubleshooting hacks will help you get rid of the Rockspace extender not showing up on network list issue. You can now connect to the extender’s WiFi and have lag-free internet access.