Rockspace AX1800 Wi-Fi 6 Range Extender | AX1800 Setup

Rockspace AX1800 Wi-Fi 6 Range Extender

Designed to provide to faster and stronger network with cutting-edge WiFi 6 technology, the Rockspace AX1800 Wi-Fi 6 range extender helps you kick off irritating lags, endless loading times, and dead zones in the house. Not only this, but this AX1800 extender by Rockspace is capable of providing enhanced WiFi coverage on 64 devices at the same time. The two 5dBi antennas cover approximately 1300 square feet of area thereby making the dead spot a live internet zone. But, all this won’t happen until you take the plunge and do not perform Rockspace AX1800 setup. This guide is mainly focused on the instructions to set up the Rockspace range extender. Read on.

Rockspace AX1800 Setup via re.rockspace.local

The first and foremost method of setting up the Rockspace AX1800 Wi-Fi 6 range extender includes the use of the web address re.rockspace.local. FYI, it is the domain name of every Rockspace extender with the help of which users can manage, monitor, and even install their devices. Here’s how you can use this web address for the installation of your wireless extender:

  • Take the extender out of its packaging and connect it directly to a power socket.
  • Toggle the Power button to the ON position and let the lights on your AX1800 get stable.
  • Grab an Ethernet cable and insert its one end to the Ethernet port of the host access point and another to that of the main router.
  • Lay your hands on your computer or laptop and run a browser (IE, Edge, Chrome, etc.)
  • Now, consider navigating the mouse cursor to the address field a.k.a. location bar.
  • Here, you need to key in the Rockspace AX1800 domain name (re.rockspace.local).
  • Done with the URL entry? Press the Enter key on your keyboard then.
  • Soon, you will cross paths with the Rockspace AX1800 Wi-Fi 6 range extender login page.
  • Enter the default values of the extender’s credentials into their designated spaces.
  • The selection of the Log In button will unlock the door to the setup wizard of the extender.
  • Consider walking through the prompts appearing on the screen for the rest of the process.
Rockspace AX1800 Setup

As soon as you follow the last instruction appearing on the Rockspace AX1800 setup wizard, you’ll notice that it is ready to broadcast its network name. Thus, access the same and enjoy the digital world via the newly created Rockspace network. However, if you feel like needing help with the Rockspace setup via the default URL, getting in touch with our experts will be an excellent choice.

Rockspace AX1800 Setup via 192.168.0.254 IP

Users who do not want to set up their Rockspace AX1800 Wi-Fi 6 range extender via the default web address can opt for the default IP address. This is to inform you that the default IP address of the AX1800 range extender is 192.168.0.254. The steps to complete the extender’s installation are as same as those mentioned in the previous section. But this time, you are required to use the default IP address as a substitute for the web address. Just in case you need personalized assistance for the Rockspace AX1800 setup via its default IP address, don’t forget that our experts are always available for your help.

Rockspace AX1800 Setup via WPS Method

This method is for users who want to extend the network range of those access points that support the WPS configuration. So, if you own a WPS-supported access point, this section will prevent you from the hassle of accessing the default IP or web address of the range extender. The Rockspace AX1800 Wi-Fi 6 range extender setup process via this approach is known as the WPS method. Check out the instructions highlighted below to make your wireless device up and running using this approach:

  • Firstly, give some space to your Rockspace device in the room where the host AP is sitting.
  • You are required to power up both WiFi devices now.
  • Are the LEDs on your devices stable? If yes, then push the button labeled WPS on AX1800.
  • Similarly, press the WPS button on your host access point.
  • The Rockspace AX1800 setup process is completed.

This brings us to the end of the section revealing the setup process of the Rockspace range extender via the WPS approach. However, remember to change the location of the extender after the completion of the installation process. It will help WiFi signals reach the farthest corner of your house.

What’s More After Rockspace AX1800 Extender Setup?

Most users think that their responsibility has been completed after installing the Rockspace AX1800 Wi-Fi 6 range extender. But, it is not true. What about the maintenance of the extender’s network? How can you forget to take action regarding its performance and security? Well, you need to do the following things once you are done with the installation of your wireless device:

Rockspace AX1800 Extender
  • Change the Rockspace AX1800 setup password
  • Alter the SSID and network key (WiFi Password) of the newly created WiFi network
  • Update the firmware of the wireless range extender
  • Change the operating mode as per your requirement
  • Hide the SSID of the range extender
  • Select the least crowded WiFi channel

Apart from the aforementioned things, there’s a lot more on the list that can be done by you for the home network’s customization.

Just in case you want to know about them, contact our technical support team without a second thought. Know that they will not only make you aware of the unique features of the Rockspace AX1800 Wi-Fi 6 range extender but also let you get acquainted with their use.

Ask Me

Disclaimer: re-rockspace-local.net is a team of seasoned professionals having years of experience in resolving extender-related issues. All logos, brand names, images and trademarks used on the website are for referential purpose. re-rockspace-local.net provides its expert services to customers who approach us directly via email or chat.