Rockspace Extender Slow Speed – Learn How to Fix It

Are you tired of the Rockspace extender slow speed problem? Well, we can understand what you’re suffering from and that is why we’ve penned down this post. The reason is, ignoring the slow speed problem can give birth to major issues like WiFi extender no internet. So, don’t wait for it to happen. Give a shot at the tips mentioned here and learn how to overcome the obstacle that is not allowing you to get the maximum speed from your range extender.

Before Doing Anything Else – Restart

Other tips will be discussed later, but let’s first focus on the most versatile technique that is known to fix many issues occurring in the networking realm. Yes, we are talking about restarting. For your information, restarting a networking gadget not only provides it the opportunity to rest but also the ability to resolve minor glitches that can play a significant role in causing the issue in discussion. Therefore, you should consider restarting your Rockspace range extender.

The only effort required from your end is to power down the extender and keep it unplugged for some time. Once you feel like the device has been given enough recovery time, power it up after connecting it to the respective power socket and see if the Rockspace extender slow speed problem is still troubling you.

On the off-chance, it is, learning other hacks will be beneficial for you. But, what’s more advantageous is getting acquainted with the reasons causing the problem as you’ll be able to tackle the issue effectively after that.

Rockspace Extender Slow Speed – Reasons

1. Presence of WiFi Interference

You might experience slow speed while using your WiFi extender if it is surrounded by a lot of objects and devices that create signal interference. To put it simply, there is a possibility that the signals emitted by your extender are getting blocked or diverted.

2. Worn-out Ethernet Cable

Your Rockspace extender fetches an internet connection from the router. Keeping this in mind, the cable connecting both devices must be non-damaged. But, it seems that you’ve used a worn-out cable for the same.

So, these were the most prominent reasons why you are struggling with the Rockspace extender slow speed problem. Now, let’s head over to resolve the issue. But, before all that, we suggest you reduce the distance separating your WiFi extender and router. Perhaps, you’ve placed your devices so far that they are unable to communicate. Thus, bring them a little closer. But, attention! Not so close that their WiFi signals clash and you face issues accessing re.rockspace.local address.

Rockspace Extender Slow Speed – Solutions

1. Eliminate Signal Interference

Change the location of your range extender to get rid of the slow speed problem. As mentioned in the sections describing the reasons that there’s a probability of your extender’s signals getting diverted, you are suggested to remove interference-creating factors from its surroundings. Taking into account the fact that heavy electrical appliances cannot be relocated [major factors of WiFi interference], pick your extender up and plug it at a location where there are minimum electrical appliances, objects carrying a large amount of water, and reflective surfaces.

2. Get the Ethernet Cable Replaced

A damaged Ethernet cable won’t be able to serve you with the internet connection for the long term. So, you are suggested to get it replaced with a new one as soon as possible. However, remember that replacing the cable is not the only thing you need to do fix the Rockspace extender slow speed. You also need to ensure that the connection created by you is finger-tight. Else, all your efforts till now will go down the drain. Do yourself a favor and ensure that the Ethernet ports of your WiFi devices are working properly.

Let’s Summarize

Now, with the last tip, it is time to summarize what we’ve tried to make you learn here. You got to know that restarting a range extender helps to keep glitches at bay and hence the process has the ability to resolve the Rockspace extender slow speed issues. After that, you become aware of other reasons that cause speed problems.

Furthermore, you also got familiar with the optimal extender-router distance and with the fact that the elimination of WiFi interference and usage of a non-damaged cable is necessary to avoid speed issues. However, we would like to provide you with the final tip for upgrading the extender’s firmware by accessing the 192.168.0.254 IP address. You can find the in-detail procedure in the user manual of your WiFi device.